How to Read Volume in Graduated Cylinder

Download Article

Download Article

Finding the volume of a regular object, such as cube or sphere, is typically done using an equation. Irregular objects like a screw or rock require a more hands on approach. Luckily, in that location is a straightforward fashion to calculate the volume of irregular objects using the water levels in a graduated cylinder.

1. 1

   Add h2o to a graduated cylinder. Cull a graduated cylinder that the object will hands fit inside. Tilt the cylinder while pouring the water to reduce bubbling. Pour enough water in to fill the cylinder to the halfway marking.^[i]

2. 2

   Read the meniscus. Yous volition notice that the water is higher on the sides of the cylinder and droops slightly in the middle. This droop is known as the meniscus and is the standard point at which the water level is measured. Make sure that the cylinder is on a flat, level surface and that in that location are no bubbles. Wait closely where the meniscus rests.^[2]

   Ad

3. three

   Record your measurement. It volition be of import to know the initial water level exactly. Write down the measurement that you took in a table or lab notebook. Your measurement will be mL. ^[iii]

   Advertizement

1. i

   Submerge your object. Tilt the cylinder. Slide the object into the h2o slightly. Be sure that your object is completely submerged in the h2o. If in that location is not plenty water to submerge the object, you will accept to beginning over with more water in the cylinder.^[iv]

2. 2

   Take a new measurement. Let the object and the h2o settle. Make sure that the cylinder is on a flat level surface. At present look at the water level (again read the meniscus). The water level should accept increased with the object being added to the cylinder. ^[5]

3. 3

   Tape your final measurement. The final measurement will be just as important as the initial measurement in your calculations. Information technology too must be precise. Write downwards the terminal water level in mL in your table or lab notebook.^[vi]

   Advertisement

1. 1

   Understand the measurements. Some people jump to the conclusion that the terminal reading gives them the volume of their object, merely this is wrong. The terminal reading is the volume of water plus the volume of your object. You lot will demand to find the divergence of the terminal and initial readings to know the volume of your object.^[vii]

2. 2

   Solve for the deviation between water levels. You volition prepare up the equation Five_total - V_water = V_object. Five_total is your concluding measurement, V_water is your initial measurement, and V_object is the volume of your object. In other words, subtract the showtime measurement from the 2nd to find the volume of your object.^[8]

3. three

   Analyze your answer. Make sure that the book you calculate makes sense. Plainly, y'all can check your calculation with a calculator. Some obvious signs of a mistake are things like your object having negative volume (this isn't possible) or a volume larger than the cylinder could hold (a volume of 30 mL cannot exist measured in a 25 mL cylinder). If your respond seems wrong, you should beginning bank check your equation to brand sure you did the math properly. If yous did, you will accept to redo the experiment and obtain new measurements.^[9]

   • If you found a negative volume, it is likely that yous but mixed up the initial and final measurements in your equation and do not demand to redo the experiment.
   • If y'all obtain a number too large to be reasonable, you either made an arithmetic error or wrote downwardly incorrect measurements. If it is the latter, you will accept to redo the experiment.

   Advertisement

Add New Question

• Question

  What is the formula to find the volume of an irregular object?

  

  At that place is no formula; however, you tin can take the object and place it in a jar of precisely measured water, so place the object in the water. Lookout the amount of ml (or liters depending on how large the object is). The amount information technology goes up or displaces the water to is the volume of the object.

• Question

  Why does one use a measuring cylinder to discover the volume of an irregular solid object?

  

  You lot need to notice the difference between initial and final readings to know the volume of your object.

• Question

  Is water displacement a adept fashion to find the book of irregular objects?

  

  Yes, it is.

• Question

  Who invented the outset way of determining the book of irregular-shaped objects?

  

  Archimedes, since he found that objects displace water when he was in a bathtub.

• Question

  What is the formula of an irregular object?

  

  First you find the regulate Schindler, and then you apply it gently to the contortion. Add together the two together for your formula.

• Question

  If the object is hollow, will there be any difference in its volume?

  

  A hallow object volition exist less dumbo than an as sized solid object. However, the book will exist the same.

• Question

  What will happen if the volume of an irregular solid is found instead of h2o?

  

  Gear up the cylinder on a flat surface at room temperature. If there are bubbles nowadays, wait a few moments for them to pop. Tilt the cylinder, and gently slide the object downward until it'south fully submerged. Subtract the original measurement from the new measurement. The deviation is the volume of the object.

• Question

  What is the of volume of an irregular shape?

  

  The final measurement is with the object and h2o, minus the measurement of the water at first.

• Question

  A student is measuring the volume of water in a graduated cylinder. She measures the book of water as 80.0 mL. She discovered that the actual book was 80.1 mL. Is her measurement accurate?

  

  Yes, information technology would be considered authentic since the expected answer: a) is nigh equal the actual respond, and b) falls within the range of exprimental error (things similar human or equipment error).

• Question

  What is the instrument used to measure out the volume of and irregularly shapeed solid?

  

  You lot would utilise either a measuring cylinder like the article says above, or use a Eureka can, which pours the water displaced past the object whose volume you're measuring into a measuring cylinder.

See more answers

Ask a Question

200 characters left

Include your e-mail accost to go a message when this question is answered.

Submit

Advertizement

Video

• Be sure that you lot measure out the meniscus correctly.

• Measure multiple objects and compare them.

Thank you for submitting a tip for review!

Advertisement

Things You'll Need

• A Graduated Cylinder
• H2o
• An Object

About This Article

Article Summary X

To detect the volume of an irregular object using a graduated cylinder, start by adding water to a cylinder that tin can accommodate the size of the object and write downwards the measurement for the current water level. Side by side, slide the object into the water, permit it settle at the bottom of the cylinder, and record the new h2o level measurement. Then, subtract the beginning measurement from the second measurement to summate the volume of your object! For tips on properly interpreting the meniscus, read on!

Did this summary help you?

Thanks to all authors for creating a page that has been read 221,280 times.

Did this article help you?

abramsveng1947.blogspot.com

Source: https://www.wikihow.com/Find-the-Volume-of-an-Irregular-Object-Using-a-Graduated-Cylinder

Share this post